Triplett Telco Testers Accutone & Terminator

Distributed By:
Instrument Meter Specialties, Inc.
Phones: 800-926-3837....661-945-5664
FAX 661-339-2309
We accept Visa - MasterCard - American Express

Triplett Telco Testers
The Accutone & The Terminator

DISCONTINUED

The Accutone Catalog No. 3320

Features
Tone Generator

1004 Hz ±1 Hz

Switchable Output Impedance

Quiet Termination

Electronic Holding Circuit used to capture a CO powered line The Accutone is a portable lightweight
precision tone generator providing a low distortion sine wave at a stable amplitude
and frequency.
The tone is used to make line loss
measurements .

It may also be used to aid in trouble-
shooting and tracing lines.

General Specifications
DISCONTINUED

Frequency 1004 Hz at 1 Hz

T.H.D. <1% (-40dB) at 0dBm Output

Amplitude 0dBm at ±0.2dB at 600 Ohms
0dBm at ±0.2dB at 900 Ohms

Quiet 2.2µF in Series with 600 ohms - 600 ohm setting
2.2µF in Series with 900 ohms - 900 ohm setting

Hold Electronic Type

Battery Life Min of 150 Hours using 9V Alkaline
Eveready #522 (NEDA 1604A)

Low Battery
Annunciator Output tone alternates between 1004 Hz at
0dBm and 1350 Hz at approx. -8dBm

Dimensions 5.5" (W) x 2" (H) x 3" (D)

Warranty One Year

Catalog Number: 3320

DISCONTINUED

The Terminator Catalog No. 3310
DISCONTINUED

Features
DISCONTINUED

Switchable Termination
Longitudinal Current
Measurements

Dial Thru Provision
The Terminator provides a balanced termination on the telecommunication transmission lines. The
Terminator is used in conjuction with a Loop Tester
with a circuit noise measuring feature (Model 7 or
Model 2) or similar testing device. The Terminator
permits the user to determine the magnitude of the longitudinal balance and the direction of the unbalance

Specifications
DISCONTINUED

Longitudinal
Balance 70dB Minimum, 300 Hz to 3k Hz with an impressed
DC bias of Zero to 100 mA DC Measured in Accordance
with IEEE Standzrd 455-1976 or Equivalent

Longitudinal
Current Output The test set is connected across a 7.5 ohm resistor in Series with Longitudinal Path.

Load Temperature 750 Ohm Switchable (on/off) Termination to Allow Tip and
Ring Loading Either 600 or 900 ohm line

Dimensions 5.5" (W) x 2"(H) x 3" (D)

Warranty One Year

Catalog No. 3310

Back to Triplett Test Equipment Contents

Back to Test Equipment Price List

Phones: 800-926-3837....661-945-5664
FAX 661-339-2309

We accept Visa - MasterCard - American Express

Jump to IMS (Instrument Meter Specialties) Home Page)

Copyright © 1998-2001 Instrument Meter Specialists

General Specifications DISCONTINUED
*Frequency*	1004 Hz at 1 Hz
*T.H.D.*	<1% (-40dB) at 0dBm Output
*Amplitude*	0dBm at ±0.2dB at 600 Ohms 0dBm at ±0.2dB at 900 Ohms
*Quiet*	2.2µF in Series with 600 ohms - 600 ohm setting 2.2µF in Series with 900 ohms - 900 ohm setting
*Hold*	Electronic Type
*Battery Life*	Min of 150 Hours using 9V Alkaline Eveready #522 (NEDA 1604A)
Low Battery Annunciator	Output tone alternates between 1004 Hz at 0dBm and 1350 Hz at approx. -8dBm
*Dimensions*	5.5" (W) x 2" (H) x 3" (D)
*Warranty*	One Year

Longitudinal Balance	70dB Minimum, 300 Hz to 3k Hz with an impressed DC bias of Zero to 100 mA DC Measured in Accordance with IEEE Standzrd 455-1976 or Equivalent
Longitudinal Current Output	The test set is connected across a 7.5 ohm resistor in Series with Longitudinal Path.
Load Temperature	750 Ohm Switchable (on/off) Termination to Allow Tip and Ring Loading Either 600 or 900 ohm line
Dimensions	5.5" (W) x 2"(H) x 3" (D)
Warranty	One Year