Distributed By:
Instrument Meter Specialties, Inc.

Phones: 800-926-3837....
818-841-2417...FAX:  818-841-2379

We accept:  MasterCard - Visa   American Express 

GIMA Options    MODBUS®  Communications

The MODBUS® Communications Option Module for the GIMA Series adds multi-drop serial commun- ications to any standard GIMA meter. The device uses a high speed microprocessor to extract information from the meter and interface to an industry standard MODBUS® system.

Use of a dedicated communications processor ensures optimum efficiency, allowing fast access to data on systems with multiple meters. At 19200 baud it is possible to access and download the main instantaneous data tables (24 values) from 10 GIMA meters in one second

The use of MODBUS® protocol ensures compatibility with existing systems and/or many readily available software packages.  This Options Module may be configured as RS485 or RS422 providing 2 or 4 wire communications over distances up to ¾ mile.  Data rates of 4800, 9600, 19200 baud may be selected to suit systems requirements.

The Communications Option Module is available in two formats:

  • Standard: Only parameters displayed on the GIMA meter can be accessed via MODBUS®
  • All Value: The full set of GIMA G400 parameters can be accessed via MODBUS® from any GIMA

GIMA Options    MODBUS®   Specifications

MODBUS® Serial Comms

Bus Type RS422 / RS485 4/2 wires+OV Half Duplex
RX Loading ¼ unit load / options module
TX Drive 32 unit loads
Protocol MODBUS® RTU w/16 bit CRC
(JBUS compatible)
Baud Rate 4800,9600,19200 or user programmable
Address User-programmable (1-247)
Max Data Packet Any complete table ( energy, instant-
aneous, set-up, etc.)
Command Rate New command within 5ms of previous one
Mechanical (Options Module) Auxiliary Supply
Enclosure Custom Options enclosure
Material: Mablex UL94-V-0
Option Module 115VAC or 230VAC 50/60-Hz ± 15%
Automatic voltage selection when inserted  into GIMA meter.
GIMA meters must be rated to match either selection.
Dimensions 2.95" x 2.32" x 3.43"
Unit unfitted 75mm x 59mm x 87mm
GIMA meter
+ Options
5.43" x 3.78" x 3.78"
138mm x 96mm x 96mm
Load 3VA Maximum
Behind Panel 5.12" ( 130mm) Isolation 2.5kV contimuous (Internally wired to GIMA auxiliary inputs)
Weight Approx. 7 oz (200g)
Terminals Rising Cage. Cable (max ).06"(1.5mm)
Solid .04" (1.0mm) Stranded
 

Back to Simpson Digital Panel Meters 

IMS (Instrument Meter Specialties Home Page)

Phone....1-800-926-3837.....1-818-841-2417.....FAX 1-818-841-2379

We accept Visa  -   Master Card  -  American Express

Copyright © 2001  Instrument Meter Specialties, Inc