1,000A AC,Hz,VDC, Clamp-on Multimeter Digital

Features:

•Peak Hold/Data Hold function
• Autoranging on V, ?, A, Hz
• Bar-Graph indication
• 3-3/4 Digital LCD with Bar-graph
• Autoranging on Volt, Ohm, Current, Frequency measurements
• Auto-power off
• Data Hold mode
• MAX/MIN Hold mode
• Zero Adjustment/Relative Reading
• Two year warranty

Specifications for TES-3040 AC
IEC 1010 CAT. III 600V POLLUTION 2

Numerical Display: 3-3/4 digit liquid crystal
display (LCD) maximum reading 3999
Over Range Indication: LCD will show an “OL”
Sampling Rate: 20 times/sec (Bar-Graph)
2 times/sec (Digital Display)
Power Source: One 006p 9V or IEC 6F22
or NEDA 1604 Battery
Battery Life: 300hr approx.
Polarity: Automatic polarity “—” display for
Auto-power off time: Approx. 30 minutes negative input
Operating Temperature 0°C to 40°C
and Humidity: (32°F to 104°F) below 80% RH
Storage Temperature -10°C to 60°C
and Humidity: (14°F to 140°F) below 70% RH.
Dimensions: 239(L) x 66(W) x 34(H) mm
Weight: Approx. 365g
Jaw Opening: 46mm

DC Voltage (Autorange & Manual)
Range: 400mV/4V/40V/400V/600V
Resolution: 0.1mV/0.001V/0.01V/0.1V/1V
Accuracy: ą 0.75% rdg + 2 dgts
Input Impedance: >1000M?/ 11M?/ 10M?
Overload Protection: 660Vrms
AC Voltage (Autorange & Manual)
Range: 4V/40V/400V/600V
Resolution: 0.001V/0.01V/0.1V/1V
Accuracy: ą 1.2% rdg + 5 dgts/ą 1.5% rdg + 5 dgts
Input Impedance: 11M?/ 10M?
Overload Protection: 660Vrms
Frequency Response: 40~450Hz
AC Current (Autorange & Manual)
Range: 400A/1000A
Resolution: 0.1A/1A
Accuracy: ą 2% rdg + 5 dgts
Overload Protection: 1100A
Frequency Response: 40~450Hz
Frequency (Hz) (Autorange only)
Range: 100Hz/1KHz/10KHz/100KHz/1000KHz
Resolution: 0.01Hz/0.1Hz/0.001KHz/0.01KHz/0.1KHz
Accuracy: ą 0.5 rdg + 2 dgts
Sensitivity: 100mV or 1A
Overload Protection: 1100A/600Vrms

Resistance (Ohms) (Autorange & Manual)
Range: 400Ohms/4KOhms/40KOhms/
400KOhms/4MOhms/40MOhms
Resolution:
0.1?/0.001KOhms/0.01KOhms/
0.1KOhms/0.001MOhms/0.01MOhms
Accuracy:
ą 1% rdg + 2 dgts
ą 1.5% rdg + 2 dgts
Open Circuit Voltage: <0.5VDC
Overload Protection: 600Vrms
Audible continuity
Range:
Continuity Beeper: <40?
Open Circuit Voltage: <0.5V
Overload Protection: 600Vrms
Diode Test
Range: ( >|+ )
Resolution: 0.001V
Accuracy: ą 1% rdg + 2 dgts
Overload Protection: 600Vrms
Accessories
Carrying Case, Instruction Manual,
Safety Test Leads, Battery