Electro-Numerics Micro-P, Mighty 1 & 4 Series pg2

©	Electro-Numerics, Inc.
	MICRO-P, MIGHTY-1 AND MIGHTY-4 SERIES 5 Digit (99,999) Indicators with 0.56", 1" & 4" LED Digits

The Micro-P, Mighty-1 and Mighty-4 digital displays are state-of-the-art instruments for a wide range of monitoring and control applications. By selecting one of four signal conditioner cards and simple front panel push-button setup, these displays will measure DC Voltage or Current, True RMS Voltage or Current, Strain Guages, Process Signals, seven Thermocouple types, 100 ohm Platinum RTD's as well as Load Cells

FEATURES	PLUG-IN OPTIONS
Signal Inputs: DC Voltage and Current, true RMS, AC Voltage & Current, strain gauge "process" (4/20mA, 0/10V) RTD's, thermocouple and load cells	Dual Setpoint Controller:10 amp 240 Vac Form C Relays or Isolated Transistor Inputs
Three Calibration Methods: Allows easy setup to your transducer or sensor.	Isolated Linearized Analog Outputs: 0 to 10 Vdc or 0 to 20 (4/20) mAdc
60 Readings per Second For: Fast control response, True Peak Reading, Analog outputs that track the input.	Isolated Digital Communications:RS-232 for Interface and meter setup. RS-485 to interface with multiple meters. Baud rates from 300 to 19,200. Parallel BCD output.
Scalable to 5 Digits: Engineering units to ±99,999, Setup by front panel push-buttons or computer.	Isolated Low Voltage Power Supply: 9 to 37 Vdc and 8 to 28 Vac
Worldwide Power: 85 to 264 Vac & 90 to 379 Vdc
Isolated 5, 10 or 24 Vdc Output: Provides Transmitter excitations
Peak Hold and Push Button Tare: